Seth Gallagher Workshop | Uilleann .com

ACCESSORIES:
Reed-Making Kits, Pipe Cases & Bag Covers

basic reed-making kit:
DISCOVER THE ZEN PLEASURES OF REED-MAKING!
BETTER THAN AN ISLAND PARADISE VACATION!!

$170 w/five tubing staples
$190 with three tubing staples, two rolled staples
(shipping included)

Kit Includes:
  1. Ten (10) slips of pre-gouged cane, with one slip finished (sides parallel, inside finish-sanded) for comparison, as well as one side of a finished reed head for comparison.
  2. Five (5) staples--either five tubing staples or three tubing staples and two rolled staples -- and twelve (12) copper bridle blanks. With recycling this should keep you going for a while. All staples designed for Gallagher chanter. Contact me if you need a different size.
  3. Mandrel w/wooden handle for holding the reed in the tying up process, and squooshing the staple to make a tubing staple. This is not the tapered rolling mandrel.
  4. 6 inch dial caliper
  5. Three sanding cylinders: 2.375", 2.5 and 2.75".
  6. Unwaxed floss and beeswax/thermowax mixture in leather holder.
  7. Needle-nosed pliers w/ clipper (to trim bridle)
  8. Stanley Utility Knife
  9. Plus ebony cutting block, sandpaper, teflon tape, and a hard copy of my reed-making guide with update.
      If you don't need:
        • pliers, subtract $5
        • utility knife, subtract $5
        • calipers, subtract $12

Not Included in the Basic Kit, but necessary for reedmaking:

  • Benchvise. Jaw opening of 2 1/2 is best, but an opening less than that of the sanding tube can be used by wrapping sandpaper around a block of wood and the tube and clamping the wood. Available at most hardware stores, or you can order one by mail from Woodworkers Supply, 1108 North Glenn Road, Casper, WY 82601, tel: 800-645-9292. They have several models, including model #891-567, a portable vise with 2 1/2" jaw opening that sells for $20.

Reed Kit Resupply:

  • Additional Gouged Cane--is available at $20 per 10 slips, shipping included.
  • Additional Rolled Staples--$10 a piece.

In addition to the kit, I offer:

  • thermowax/beeswax mixture, $5
  • 2 1/4" 2 3/8" and 2 1/2" sanding cylinders, $7
  • 6" dial calipers, $25, shipping included
  • tubes of cane, $2 each
  • pre-gouged slips of cane, 10 slips for $20, shipping included
  • wooden-handled tying up mandrel (if you don't need to make staples), $20, shipping included

      Please add $4 to cover shipping unless already included, or call for shipping cost per your order.

To order, please send a check or money order to Seth Gallagher, Seth Gallagher Workshop, 10 Garden Street, Cold Spring, NY 10516. Also, please indicate in a note or on the check exactly what it is you are ordering.

PIPE CASES

click image to see larger photo

click image to see larger photo

Hard Case for Pipes:
Plywood covered in black case-material, nickel hardware.
Immitation fur and (real) foam lining. 6 x 12 x 30.
$160 plus $25 shipping

 

To order, please send a check or money order to Seth Gallagher, Seth Gallagher Workshop, 10 Garden Street, Cold Spring, NY 10516. Also, please indicate in a note or on the check exactly what it is you are ordering.

Leather Gig Bag:
CacSac Gig Bags
http://www.cacsacgigbags.com

BAG COVERS

Hand-sewn Decorative Velvet Bag Covers
Choose from Navy, Green or Wine
$60

 

To order, please send a check or money order to Seth Gallagher, Seth Gallagher Workshop, 10 Garden Street, Cold Spring, NY 10516. Also, please indicate in a note or on the check exactly what it is you are ordering.

[ Uilleann.Com Home | Price List and Ordering Information | Flutes Information and Price List | Photos and Music Clips | Other Products: Tutors and Accessories | About the Maker | The Reed-Making Workshop | NEW Photo Page | Maintenance Guide | Uilleann Piping Contacts | Frequently Asked Questions | Uilleann Piping Links | Jerry O'Sullivan's Website | Contact Information | Tionol Information Page ]

©1997—2012 Seth Gallagher

please report any problems to the webmaster